NEWS

Silk screen

1. Through the extrusion of the scraper, the ink is transferred to the substrate through the mesh of the graphic part, forming the same graphic as the original.

2. There are many screen printing colors, refer to Pantone color card, but gradient printing cannot be achieved.

Hot stamping

1. Hot stamping uses the principle of hot pressing transfer to transfer the aluminum layer in the electrochemical aluminum to the surface of the substrate to form a special metallic luster effect.

2. There are various colors of printing raw materials such as gold, silver, red, green, and blue, but hot stamping can only be monochrome. There are many kinds of colors, but not all colors are available in the market.

Four-color printing

1. The so-called four colors are: cyan (C), magenta (M), yellow (Y), and black (K). All colors can be mixed by these four inks to achieve color graphics and text.

2. Ordinary is also a common printing, and the effects printed on different substrates are different.

Spot color printing

1. Spot color printing refers to the use of a special ink to print the color during printing, which is brighter than the color mixed with the four colors.Commonly used are special gold and special silver.

2. There are many spot colors. Refer to the Pantone color card. Gradient printing cannot be achieved with spot colors. If necessary, add four-color printing.

Over-gloss glue

1. After printing, a transparent plastic film is applied to the surface of the print by hot pressing to protect and increase gloss, and the surface is bright.

2. The basic process of carton surface treatment.Similarly, there is varnish, but gluing can enhance the hardness and tensile properties of the paper.

Matte glue

1. After printing, a transparent plastic film is applied to the surface of the print by hot pressing to protect and increase gloss, and the surface is matte.

2. The basic process of carton surface treatment is similar to varnish, but gluing can enhance the hardness and tensile properties of the paper.

Over UV

1. The parts of the print that need to be prominent are partially polished and brightened to make the local pattern more three-dimensional.

2. Printed with the matte glue process, there is no effect when the matte glue is used.

Strike convex

1. Using a set of concave and convex templates corresponding to the yin and yang of the graphics, the substrate is placed in between, and the embossed concave and convex graphics are pressed out by applying greater pressure.

2. Paper of various thicknesses can be used, but cardboard cannot be convex.